For a professional carpenter or a DIY woodworking hobbyist, a circular saw is one of the toolbox essentials of all times. Their immense power, convenience, and portability make them all the more handy and useful. From quick and accurate cuts to elaborate professional work, these can be used for all purposes.

As a circular saw is more powerful than a hand-saw/jigsaw, it can be utilized for intricate projects as well. However, it can be rather difficult to find the best circular saw for your work in such a saturated market.

Thus, this buying guide will provide you with elaborate circular saw reviews to help you make a fine choice. So, read on!

1. SKIL 5280-01 Circular Saw

SKIL 5280-01 Circular Saw

If you are searching for a basic corded circular saw solely for cutting wood, this circular saw is perfect for you. Although it does not have any premium features, it is the more affordable saw on the market. It is equipped with a 15 amp motor that is enough to cut through wood and a greater speed. Additionally, the laser can be easily adjusted using the key provided at the back of the saw.

The carbide blade is a 24-tooth spin at 5,300 RPM without any load and has a provision for effortless change of blades through a spindle lock, while the depth cut can go up to 2.375 inches. This has a singular laser beam along with a 51-degree bevel that stops at 45 degrees. Additionally, it is equipped with a convenient blower that makes the line-of-cut more visible while working with the circular saw.

This corded circular saw’s weight comes up to 8.7 pounds which makes it light enough to work with minimal fatigue. Additionally, it has an anti-snag guard that reduces the chances of snags in creating narrow cut-offs. This circular saw is best suited for carpenters and DIYers as it is powerful enough even though it does not have any premium features.

Pros
  • One of the most affordable circular saws
  • Dust blower makes it easier to work with
  • Relatively powerful motor
  • Light-weight reduces fatigue
cons
  • No premium features
  • Only suitable for wood

2. PORTER-CABLE PCE301 Heavy Duty Circular Saw

PORTER-CABLE PCE301 Heavy Duty Circular Saw

This powerful circular saw can effectively make the toughest tasks easier as it provides a 15 amp motor with 5,500RPM. Considering this, the weight of 9 pounds allows an impeccable weight to power ratio that makes it easier to use. 90-degree cuts provide 2 ½ inches while nearly 2-inch cuts can be made at 45-degree.

This saw has a preset of 22.5 degrees as well as 45-degree while the maximum is 55 degrees. The 18-tooth carbide tip of the 7 ¼ inch blade is effective and provides clean cuts without smashing through the object. The magnesium shoe of the saw as well as the upper and lower guards made of metal ensures durability while also making the machine well-balanced.

The Porter-Cable PCE301 is not only extremely powerful; it is also surprisingly affordable, available with a warranty of 3 years thereby making it the best overall saw. A spindle lock and depth adjustment attached to the saw ensure a timely change in the adjustments while working.

This circular saw delivers excellent technology that is reliable at an affordable price. It is guaranteed to work perfectly whether you are a tradesman or a DIYer. The light-weight paired with the powerful motor ensures precise cuts without a worry.

Pros
  • The lower guard is no obtrusive
  • The lighter weight allows ease of use
  • 5,500 RPM can handle many surfaces
  • Blade provides clean cuts
cons
  • No rip guide

3. DEWALT DCS575B Flexvolt Circular Saw

DEWALT DCS575B Flexvolt Circular Saw

A battery-operated circular saw the DeWalt DSC575B is incredibly useful if you enjoy getting some cutting work done by yourself. It has the facility to switch from 60 volts to 120 volts according to your requirement. It works with the DeWalt Flexvolt battery system and can cut 350 2x4s with a singular charge. The blade tip coated with carbide is 7 ½ inches and can slice through the most resilient material with ease.

Additionally, this circular saw ensures the user’s safety through the electric stop placed on the blade, which can help prevent accidents. The saw is embellished with an LED light that provides further clarity and provides the most accurate cut. The 15amp motor and 5,800RPM give you all the power you need considering this saw is battery operated.

With a weight of 8.1 pounds, the DeWalt circular saw makes it easier to cut through the toughest materials. It has the capacity to cut through a depth of 2 ¼ inches at 90 degrees. This machine’s cordless nature is an added advantage as you are not confined to a singular space dictated by the length of a cord.

Pros
  • The cordless saw allows ease of use
  • The additional LED light is useful when there is no sufficient light
  • The 15amp motor with 5,800RPM can cut through any material
  • Electric stop on the blade provides added safety
  • It can switch between two volts
cons
  • Cuts are not as accurate
  • Cuts are not the smoothest

4. SKIL 5180-01 Circular Saw

SKIL 5180-01 Circular Saw

This is one of the best high-quality circular saws available on the market as an outstanding engineering and numerous useful features are at play.SKIL’sSKIL’s model has a single laser beam that acts as a guide, making your cuts spot-on with ease. This circular saw is one of the lighter saws with a weight of 7.2 pounds which allows the user to make the most of the 14amp motor along with 5,300RPM.

The carbide tipped 7 ¼ inch blade is extremely efficient and it is very easy to swap out blades. The element of a dust blower makes it easier to work with this saw as it clears out the work area, eliminating obstructions. It also has a safety feature that averts the saw from starting accidentally.

This product is specifically useful for DIYers as it has better maneuverability owing to the light-weight coupled with the powerful motor. You cannot do much with this model as its features include the best of almost every circular saw. The depth accessed by this saw is close to 2 3/8 inches and it can therefore provide cleaner cuts.

The high quality and petite design of this circular saw make it more accessible for all types of tasks. The right balance between power and convenience, this saw extremely handy.

Pros
  • A single laser is an effective tool for better line of sight
  • Switching blades is quick and simple
  • The lighter weight makes it easier to use
  • The blade is better than other stock blades
  • The integrated dust blower provides a cleaner workspace
cons
  • Does not come with a carrying case

5. Makita 5007mg Magnesium 7-¼- Inch Circular Saw

Makita 5007mg Magnesium 7-¼- Inch Circular Saw

The Makita 5007mg is a sturdy circular saw with a 15 amp motor designed particularly for extensive and professional woodworking. While it might appear ordinary and heavier, you will be able to gauge its efficiency as you use it. With a no-load of 5,800 rpm, it is highly proficient in handling extensive woodworking with ease.

It has an easy-grip arm which makes it convenient to hold while making delicate or even rough cuts. This machine has an excellent balancing capability and the lightweight magnesium components allow ease of use and efficient mobility. Also, it has an ultra-coated 7-¼ inch tooth blade that is carbide-tipped to offer seamless cutting power.

This machine also has an inbuilt LED light that enables you to gauge the cutting depth properly. You can freely stop the blade and check where you need to cut midway through the operation. It has a convenient cutting capacity of about 2-½ inches at 90 degrees along with an extra bevel capacity of 56 degrees. Also, it has positive stops at 22.5 as well as 45 degrees.

This heavy-duty circular saw is equipped with a motor of 2300 wattage capacity which is fairly more than the usual. Moreover, it also has a built-in dust blower installed to instantly get rid of the dust on the cuts made. It has an electric brake which is quick and efficient for making multiple cuts. Lastly, it is a right-handed circular saw, thus, it can be a little tricky for a left-handed person to operate.

Pros
  • Sturdy motor and high RPM rate
  • Built-in LED light for precise cuts
  • Good bevel capacity
  • Built-in dust blower for smooth cutting
  • Saw blade has an appreciable cutting capacity
cons
  • Corded circular saw
  • Righthanded

6. Dewalt DWS535 Worm Drive Circular Saw

Dewalt DWS535 Worm Drive Circular Saw

For many framers, a circular saw that is worm drive is best suited. This particular saw is capable of cutting through tough lumber with ease as well as impressive precision. The worm drive gear is mainly responsible for these features as it transmits power to the blade. It is also equipped with appropriate safety measures as it comes with a hanger or hook thereby allowing the user to hold it close to their body without worry.

Although this saw is a bit heavy, all of 13.8 pounds, it is durable and will last a DIYer a lifetime if maintained properly. It is a corded electric saw which removes the worry of it requiring sufficient battery to function. The Dewalt saw also has a 53-degree bevel capacity and it stops at 22.5 degrees as well as at a 45-degree angle.

The combination of power, precision, and durability provided by the corded Dewalt saw is a dream for any framer. The worm drive saw can cut through any wood regardless of how tough or knotty it is. This saw will definitely last a long time as the body is made of magnesium metal, not unlike the shoe of the saw.

Additionally, the saw does not make too much noise as it hums and this feature can also be attributed to the worm drive. It is the best circular saw for heavy-duty work

Pros
  • The worm drive saw increases the power offered
  • Magnesium body increases durability
  • Added hook for safety while in use
  • Extremely precise
cons
  • Heavy-weight makes it difficult to work with for long periods

7. Bosch CSW41 Worm Drive Circular Saw

Bosch CSW41 Worm Drive Circular Saw

This worm drive saw is one of the more powerful circular saws available on the market. It can saw through wood with great ease, precision, and ferocity. This corded saw is engineered specifically for durability as it is equipped with a shoe plate made of magnesium metal as well as housing for the gear. Additionally, this saw is surprisingly lightweight as it is merely 13.2 pounds.

The saw’s arm drive ensures that there is always sufficient torque for a slice through any kind of wood. It is designed to cut through heavy timber as is equipped with a 15 amp motor and produces 5300 rpm without any load. Due to this power, it can be used for roofing, deck building, framing, and other job site cutting.

The bevel of this saw can go up to 53 degrees while accompanied by a system that allows easy depth adjustments and bevel adjustments owing to the levers. Additionally, the comfort of using this saw is increased due to the rubber handles which allow the user to use it for longer periods.

The multi-function wrench attached to the worm drive saw for brush changes as well as blade changes is an added feature to increase the convenience of using this saw. The built-in hook designed for storing tools while working is another simple yet attractive feature. Additionally, the anti-snag guard situated on the lower part of the saw plays a significant role in providing smooth cutting of small pieces.

Pros
  • Incredible power provided by 15 amp motor
  • Features included for additional convenience while in use
  • Can be used for multiple purposes
  • It can make precise and accurate cuts
cons
  • The weight of the worm drive is overwhelming for beginners.

8. Dewalt DWE575SB Sidewinder Circular Saw

Dewalt DWE575SB Sidewinder Circular Saw

This sidewinder saw is equipped with numerous features that account for its strength, power, and toughness. Not only is this model easy to use, but it is also extremely durable owing to the carefully engineered design. The saw is tough and durable, but it is also lightweight, weighing 8.8 pounds, which makes it easier for the user to work with for longer periods and overhead tasks.

The 15 amp motor is essentially the source of the extreme power this saw provides. The blades are capable of spinning at a maximum of 5100 rpm which is an extremely impressive number for a sidewinder circular saw. This extent of power ensures that every cut made by the tool is precise and smooth.

The saw’s high performance is further revealed with the 57-degree bevel capacity and has stops at 45 as well as 22.5 degrees, which makes it easier to get to common angles. At a 90-degree angle, this saw can cut lumber almost 2.55 inches thick.

For further convenience, the saw is equipped with a dust blower that makes the work surface clean and the cut line more visible. The comfort while using this saw is heightened with the anti-snag guard present at the lower end of the saw which is placed with ball bearings.

Sufficient safety measures are present in this model including an electronic brake which ensures that the blade will stop within 2 or 3 seconds of the trigger is released. Additionally, this model’s protection system pressures that the cord is protected against any abuse while in use.

Pros
  • Lighter than most circular saws
  • 15 amp motor provides significant power
  • Cord protection system prevents damage to the cord
  • Dust blower allows better access to the cut line
cons
  • The electronic brake may not work every time

9. Bosch CCS180B Cordless Circular Saw

Bosch CCS180B Cordless Circular Saw

This cordless circular saw has a significant advantage of being portable as opposed to the rest of the corded circular saws. With blade size of 6 ½ inches, this model is the easiest to carry around especially if you need flexibility at a job site. Its ability to cut through materials that are 2 inches thick at 90 degrees is a testament to the power this tool holds.

The compact saw weighing merely 6.6 pounds has a 3900 rpm without any load. This saw’s bevel capacity lies at 50 degrees and is equipped with an electronic brake, which ensures that the blade stops within a few seconds of releasing the trigger. Additionally, the shoe plate aside blade case is rebuilt with heavy aluminum metal which makes the saw strong and capable of carrying out heavy-duty tasks.

The left-hand circular saw can take some time to get used to as the auxiliary handle is to be held with the right hand. This saw is perfect for DIY projects as it cannot undertake heavy-duty work for too long. This tool is also useful for reaching places that are difficult to reach owing to its compact size.

Pros
  • The cordless circular saw is portable
  • Electronic brake ensures the safety
  • Aluminum metal makes the saw strong
  • Light_weight is easy to work with
cons
  • The saw is not suitable for heavy-duty jobs.

Buyers Guide For The Best Circular Saw

Choosing the best circular saw can be tricky, especially if you indulge in woodworking as a DIY hobbyist or a novice carpenter. To ensure that you understand your cutting needs better, listed below are a few pointers to guide you through:

Design

The best circular saws in the market have an easy and steady grip to offer exceptional convenience to even a novice. Some products are not well-designed and thus can make it difficult to cut the wood the right way. These can further lead to inefficiency and make your work harder. Thus, you must properly check for the cutting accuracy and the cutting angles of the circular saw.

Adjustments

The freedom or flexibility to make the right adjustments in your device allows the option of personalization. The right cutting depth, type of blade, and the capability of using cordless circular saws completely decide your entire woodcutting experience. You can manage the cutting capacity, stop the blades, and control your tool effortlessly for the best.

Blade Size and Material

When you need to cut a fairly thin piece of wood, a heavy-duty machine will be rather excessive. Similarly, for thick wood, you require extra tough and large blades to prevent them from breaking. The material to be cut thus plays an important factor here, so you must carefully analyze your needs.

For harder and tougher needs, tungsten blades can be appropriate. However, you can choose Aluminum blades for lighter weight and a carbide-tipped blade for durability.

Power

The power of a circular saw directly relates to its cutting capacity and strength of the machine. Usually, you will find a 15 amp motor in a circular saw. That ideally allows easy cutting with its high power and allows you the capability to cut through tougher wood with greater ease.

Also, the best circular saw has motors with high rpm and a dual field motor to provide quick and efficient motion.

Convenience

Among all the other factors, convenience is also a matter of great importance. One of the best features of circular saws includes a great bevel capacity to allow ease of cutting at tricky angles. While you can easily find corded circular saws, getting cordless circular saws will allow you greater freedom of motion.

Also, an inbuilt LED, laser guide, a portable cable, built-in dust blower are some of the most convenient features available.

Weight

As circular saws are operated by hand, they must be easy to operate and light in weight. If these hand-held machines are too heavy, they can cause a considerable amount of inconvenience for the user. For this, you can check the material of the circular saw. Magnesium is lightweight and thus allows easier portability and mobility while performing the wood cutting operation.

Service and Warranty

Other than the above-mentioned points, you can consider choosing circular saws of recognized brands. This will ensure that you get a definite warranty and guarantee period that comes in handy infective products. Thus, it will ensure your peace of mind with the provided reliability and security quotient.

Safety Features

Circular saws can be heavy equipment that must be handled with proper caution to avoid any mishap. This is where you can check your circular saw for a spring-loaded casing that allows automatic closing. This feature makes the possibilities of hand injuries almost negligible and ensures your safety.

Additional Features

Circular saws also have particular features that make the job more efficient. These include features like:

Laser guide

These are some of the most convenient features that you can find in a circular saw. Laser guides provide assurance and offer better confidence in gauging the depth of cut and making a cut with absolute precision. Especially for novice or hobbyists, the entire setup makes the wood cut-ready and allows careful execution.

Spindle Locks

A spindle lock does not come with all the circular saws but can be a useful feature too. It is basically a lock feature that holds the components and does not let them move at all. This feature can come in handy when the user changes components and doesn’t want the saw to change.

Electric Brakes

These have adequate power to stop the saw blade motor within 3 seconds. The circular saws with no electric brake can take too long to stop and might even cause severe accidents.

Blade Replacement Ease

Ease of Blade replacement is another feature that makes the equipment handling much swifter and convenient. As the blade becomes dull, or a different blade is required to cut the particular wood material, this can come in handy. Replacement of blade makes your work much efficient and quick.

So, if your woodcutting purposes require frequent blade replacements, you must check the circular saw for ease of blade replacement.

You can look for these features if your woodcutting purposes require them.

The Brand

As you look into the vast market of circular saw, you might come across many brands. While some brands have some strengths, others might be weak in that particular area. This is why you must keep a check on the brand of the circular saw. Choosing the brands wisely will ensure that you get the exact features of a particular brand’s desired qualities. Some of the most prominent brands include:

  • Makita
  • Bosch
  • Porter-Cable
  • Hitachi
  • Skil
  • Black and Decker

Affordability

Other than the above-stated concerns, affordability is also one of the most important concerns here. The best pick here would be a saw with all the required features and fits in the budge. You must look into your woodcutting requirements and go for costlier/complex saws only if you have to indulge in hardcore processes.

Others

Lastly, you can check your circular saw for the below-listed features as well:

  • Power of the motor
  • LED Lights
  • Direct drive
  • Blade of lower weight
  • Proper Blade guard
  • A dust-port
  • A clear line of sight
  • Power tools/installments

What is the best circular saw to buy?

To state which one would be the best choice depends on your particular woodcutting needs. At the same time, there are mainly three types of circular saws, namely- cordless, sidewinders, and worm drives. Amongst all, cordless circular saws seem to be the best possible option given it’s convenient and dynamic features.

These are light in weight, and the absence of a cord makes mobility simpler and effortless. If your cutting work ranges from lightweight to medium level, it can be the right option for you. Also, it comes in the left blade range for a left-handed user, which can be preferred for a powerful cutting experience.

It allows the user to observe the cut line and making the cutting depth adjustment effectively. While it limits the user to lighter cutting options, it’s blade can be easily managed to get the desired cut line.

Are more teeth on a Circular Saw blade better?

Circular saws come with a great variety of saw blades and tooth numbers. These can range from 14 teeth to even 120, depending upon the type of task they are being used for. For the cleanest possible cuts, using the right tooth number becomes necessary. This makes sure that the blade cuts faster and the entire process is optimally sound.

A lower tooth number blade tends to cut through the material faster but with very low neatness. However, a blade with a greater tooth number is slower and might even burn up lesser tough materials. If the neatness is a matter of concern for you, then a higher tooth number must be preferred. But if not, then a lower tooth number will make your work easy and efficient.

Is a Circular Saw worth it?

The most admired feature of a circular saw is the great variety of cuts it allows the user to make. From masonry, cutting, steel, lumber to even softer materials like plywood, it can be used to get the desired cut. From worm tail to cordless, you can get the saw that suits your requirement perfectly.

Almost every other carpentry or woodworking task can be successfully accomplished using this. Thus, given its high versatility and appreciable quality and features, it can be worth every penny you get it for.

Which is better, Miter Saw or Circular Saw?

For power tools, Miter tools are also used for woodcutting purposes to obtain accurate cross-cuts even at trickier angles. These can also cut of bevel and a combined version of both. However, a circular saw is limited to crosscuts and can perform almost every other cutting task at difficult angles.

A Miter saw is dedicated to one particular angle and making of crosscuts that it can perform with utmost efficiency. However, this limitation is overcome by circular saws as they can perform Miter’siter’s of well as others. While the efficiency might be low, and the quality of cut might decrease, these factors mostly don’t matter as much.

Thus, a circular saw is better in terms of versatility, while a Miter saw is efficient in quality crosscuts at a difficult angle. So, out of these, the one best for you depends on the work that it would be used for.

Final Takeaways

Now that you know what to look for while purchasing a circular saw, you can proceed with a clear mind. The above-listed products are some of the best circular saws in the market from which you can choose. All you need to do is understand your woodworking needs and choose the most befitting machine of all.

So, go on and make the right choice for yourself!

Write A Comment